Refereed Archival Journal Publications

Journal Publications (complete listing 1988-Present)

1988-1991

1. Cohen, M. D., Mobasher, B., “Drying Shrinkage of Expansive Cements”, Journal of Materials Science, 23, (1988) pp. 1976-1980.

2. Shah, S. P., Ludirdja, D., Daniel J. I., Mobasher, B.,”Toughness-Durability of Glass Fiber Reinforced Concrete Systems”, ACI Materials Journal, Sept-Oct. 1988, pp. 352-360. Discussion, 85-M39, ACI Materials Journal, July-Aug. 1989, p 425.

3. Mobasher, B., and Shah, S. P.,”Test Parameters in Toughness Evaluation of Glass Fiber Reinforced Concrete Panels”, ACI Materials Journal, Sept-Oct. 1989, pp. 448-458.

4. Stang, H., Mobasher, B., Shah, S. P.,”Quantitative Damage Characterization In Polypropylene Fiber Reinforced Concrete”, Cement and Concrete Research., Vol. 20, No. 4, pp. 540-558, 1990.

5. Mobasher, B., Stang, H., Shah, S. P.,”Microcracking in Fiber Reinforced Concrete”, Cement and Concrete Research, Vol. 20, No. 5, pp. 665-676, 1990.

6. Mobasher, B., Castro-Montero, A., Shah, S. P., “A Study of Fracture in Fiber Reinforced Cement-Based Composites Using Laser Holographic Interferometry,” Experimental Mechanics, Vol. 30, No.3, 1990, pp. 286-294.

7. Ouyang, C. S., Mobasher, B., and Shah, S. P., “An R-Curve Approach for Fracture of Quasi-Brittle Materials”, Engineering Fracture Mechanics, Vol. 37, No.4, pp. 901-913, 1990.

8. Mobasher, B., Ouyang, C. S., and Shah, S. P., “Modeling of Fiber Toughening in Cementitious Composites using an R-Curve Approach”, International Journal of Fracture, 50: 199-219, 1991.

9. Li, Z., Mobasher, B., and Shah, S. P., “Characterization of Interfacial Properties in Fiber-Reinforced Cement Based Composites”, Journal of American Ceramic Society, 74 (9) 2156-64, 1991.

10. Cohen, M. D., Mobasher, B., “Effects of Sulfate and Expansive Clinker Contents on Expansion Time of Expansive Cement Paste”, Journal of Cement and Concrete Research, 21, No. 1, pp. 147-157, 1991.

1992-1995

11. Perez-Pena, M., Mobasher, B., “Mechanical Properties of Hybrid Fiber Reinforced Cementitious Composites,” Journal of Cement and Concrete Research, Vol. 24, No. 6, pp 1121-1132, 1994.

12. Mobasher, B. and Li, C. Y., “Mechanical Properties of Hybrid Cement Based Composites,” ACI Materials Journal, Vol. 93, No.3, pp.284-293, 1996.

13. Mobasher, B., and, Li, C. Y., “Modeling of Stiffness Degradation of the Interfacial Zone During Fiber Debonding,” Journal of Composites Engineering, Vol. 5, N0. 10-11, pp. 1349-1365, 1995.

1996-1999

Gettu, R., Mobasher, B., Carmona, S., and Jansen,D., “Testing of Concrete Under Closed-Loop Control,” Invited Article, Journal of Advanced Cement Based Materials, Vol. 3, No.2, March 1996, pp. 54-71.

14. Mobasher, B., and, Li, C. Y., “Effect of Interfacial Properties on the Crack Propagation in Cementitious Composites,” Journal of Advanced Cement Based Materials, Vol. 4. No. 3, Nov. Dec. 1996, pp. 93-106.

15. Mobasher, B., Mamlouk, M., and Lin, H.M., “Evaluation Of Crack Propagation Properties of Asphalt Mixtures,” ASCE Journal of Transportation Engineering, Sept. Oct. 1997, pp.405-413.

16. Mobasher, B., Pivacek A., and Haupt, G. J. “A Filament Winding Technique for Manufacturing Cement Based Cross-Ply Laminates,” Journal of Advanced Cement Based Materials, 1997, 6, pp. 144-152.

17. Pivacek A., and Mobasher, B., “A Filament Winding Technique for Manufacturing Cement Based Cross-Ply Laminates,” Innovations Forum, ASCE Journal of Materials Engineering, May 1997, pp 55-58.

18. Tixier, R., Devaguptapu, R., and Mobasher, B., “Effect of Copper Slag on the Hydration and Mechanical Properties of Blended Cementitious Mixtures,” Journal of Cement and Concrete Research, Vol. 27, No. 10., pp. 1569-1580, 1997.

19. Li, C. Y., and Mobasher, B.,”Finite Element Simulations of Toughening in Cement Based Composites,” , Journal of Advanced Cement Based Materials, 1998, 7, pp. 123-132.

20. Mobasher, B., and Pivacek, A.,”A Filament Winding Technique for Manufacturing Cement Based Cross-Ply Laminates,” Journal of Cement and Concrete Composites, 20 (1998) 405-415.

21. Reply to ‘Comment on ‘Characterization of interfacial properties in fiber reinforced cementitious composites’, Shah, S. P., Li, Zongjin, and Mobasher B, J. American Ceramic Society, Vol. 76, No. 6, 1993, pp. 1617-1618.

22. B. Mobasher, S-Y.Chen, C. Young and S. D. Rajan, “Cost-Based Design Of Residential Steel Roof Systems: A Case Study”, Structural Engineering and Mechanics 8: (2) 165-180 Aug 1999. Ariño, A. M., and Mobasher, B. ” Effect Of Copper Slag On The Strength, And Toughness Of Cementitious Mixtures” ACI Materials Journal, Jan-Feb-1999, pp. 68-75.

2000-2003

J. Montesinos, R. S. Gorur, B. Mobasher, D. Kingsbury, “Brittle Fracture in Nonceramic Insulators Part I: Electrical Aspects of Microscopic Flaws in Glass Reinforced Plastic GRP Rods,” IEEE Transactions on Power Delivery, 2002, Vol. 9.pp. 236-243.

B. Mobasher, D. Kingsbury, J. Montesinos, R. S. Gorur, “Brittle Fracture in Nonceramic Insulators Part II: Mechanical Aspects of Crimped Glass Reinforced Plastic (GRP) Rods,” IEEE Transactions on Power Delivery, 2002, Vol. 9.pp. 244-252.

B. Mobasher, D. Kingsbury, J. Montesinos, R. S. Gorur, “Mechanical Aspects of Crimped Glass Reinforced Plastic (GRP) Rods, : IEEE Transactions on Power Delivery, 2003, pp 852-858.

Tixier, R., Mobasher, B., “Modeling of Damage in Cement–Based Materials Subjected To External Sulfate Attack- Part 1: Formulation”, ASCE Journal of Materials Engineering, August, 2003. Volume 129, No. 4, pp. 373-382, 2003.

Tixier, R., Mobasher, B., “Modeling of Damage in Cement–Based Materials Subjected To External Sulfate Attack- Part 2: Comparison with Experiments, ASCE Journal of Materials Engineering, August 2003.

B. Mobasher, “Micromechanical Modeling of Filament Wound Cement-Based Composites,” ASCE, Journal of Engineering Mechanics, Volume 129, No. 4, pp. 373-382, 2003.

2004-2007

Assadi Zeidabadi, N., Mirtalae, K., Mobasher, B., “Optimized Use Of The Outrigger System To Stiffen The Coupled Shear Walls In Tall Buildings,” International Journal on the Structural Design of Tall Buildings, Volume 13, Issue 1 , Pages 9 – 27, 2004., 2004.

M. S. Mamlouk and B. Mobasher, “Cracking Resistance of Asphalt Rubber Mix Versus Hot-Mix Asphalt,” International Journal of Road Materials and Pavement Design. International Journal of Road Materials and Pavement Design. V.5., 4, pp.435-452, 2004.

Chaitanya Deenadayalu; Barzin Mobasher, PhD; Subby D. Rajan, PhD; Gary W. Hall, “MDRefractive Change Induced by the LASIK Flap in a Biomechanical Finite Element Model”, Journal of Refractive Surgery Volume 22 February 2006

R. S. Gorur and B. Mobasher, Discussion of Paper “Can Water Cause Brittle Fracture Failures of Nonceramic Insulators in the Absence of Electric Field”, by Kumosa et al., IEEE Transactions on Dielectrics and Electrical Insulation, pp. 621-626, Vo. 12, No. 1, 2005.

Peled, A. and Mobasher, B.,”Pultruded Fabric-Cement Composites,” ACI Materials Journal, Vol. 102, No. 1, pp. 15-23, 2005.

C. Deenadayalu, B. Mobasher, S. D. Rajan and G. Hall “Refractive Change Induced by the Lasik Flap in a Biomechanical Finite Element Analysis Model”, Journal of Refractive Surgery, 22:3, 1-7, 2006.

Mobasher, B., Pahilajani, J., Peled, A.,”Analytical Simulation of Tensile Response of Fabric Reinforced Cement Based Composites”, Journal of Cement and Concrete Composites, Vol. 28, No. 1, Jan-2006, pp. 77-89.

Sharda, J., Deenadayalu, C., Mobasher, B., and Rajan S. D., “Modeling of Multi-Layer Composite Fabrics for Gas Turbine Engine Containment Systems,”, ASCE Journal of Aerospace Engineering, Vol. 19, No. 1, 2006. pp. 38-45.

Mobasher, B., Peled, A., and Pahilajani, J., “Distributed cracking and stiffness degradation in fabric-cement composites”, Materials and Structures, 2006, 39:317–331

Peled, A., Mobasher, B., “Properties of Fabric-Cement Composites Made by Pultrusion,” Materials and Structures, Vol. 39, No. 8, October 2006, 39:787–797

Peled, A., Sueki, S., and Mobasher, B., “Bonding In Fabric-Cement Systems: Effects Of Fabrication Methods”, Journal of Cement and Concrete Research, 36:9, 2006 1661–1671.

A. Peled , B. Mobasher , “Tensile Behavior of Fabric Cement-Based Composites: Pultruded and Cast” ASCE Journal of Materials in Civil Engineering, Vol 19, No. 4, pp.340-348, 2007.

B. Mobasher, S-Y.Chen, C. Young and S. D. Rajan, “A COST BASED APPROACH TO DESIGN OF RESIDENTIAL STEEL ROOF SYSTEMS”

Sueki, S., Soranakom, C., Peled, A., and Mobasher, B., “Pullout-Slip Response of Fabrics Embedded in a Cement Paste Matrix, ASCE Journal of Materials in Civil Engineering, Vol. 19, 9, 2007.

Soranakom, C., and Mobasher, B., “Closed-Form Moment-Curvature Expressions For Homogenized Fiber Reinforced Concrete, ACI Materials Journal, V. 104, No. 4, July-August 2007.

Soranakom, C., and Mobasher, B., “Closed Form Solutions for Flexural Response of Fiber Reinforced Concrete Beams” ASCE Journal of Engineering Mechanics, Volume 133, Issue 8, August 2007.

2008-2011

Soranakom, C., and Mobasher, B., “Moment-Curvature Response of Strain Softening and Strain Hardening Cement Based Composites,” Cement and Concrete Composites, Vol. 30, Issue 6, Pages 465-477, July 2008

Alum, A., Rashid, A., Mobasher, B., and Abbaszadegan, M., “Cement-Based Biocide Coatings for Controlling Algal Growth in Water Distribution Canals”, Journal of Cement and Concrete Composites, Vol 30, No 9, pp 839-847, 2008.

Chote Soranakom, Barzin Mobasher, “Correlation of tensile and flexural responses of strain softening and strain hardening cement composites”, Cement & Concrete Composites 30 (2008) 465–477

Deju Zhu, Barzin Mobasher, Subramaniam Dharmarajan, “Image Analysis of Kevlar 49 Fabric at High Strain Rate”, Proceedings of the XIth International Congress and Exposition

June 2-5, 2008 Orlando, Florida USA

Soranakom, C., and Mobasher, B., “Geometrical and Mechanical aspects of Fabric Bonding and Pullout in Cement Composites,” Materials and Structures, 2009, Vol. 42. pp. 765-777 DOI 10.1617/s11527-008-9422-6.

D. Naik, S. Sankaran, B. Mobasher and S. D. Rajan, and J.M. Pereira, “Development of Reliable Modeling Methodologies for Fan Blade-Out Containment Analysis. Part I: Experimental Studies,” International Journal of Impact Engineering, 36 (2009), International Journal of Impact Engineering, Volume 36, Issue 1, January 2009, Pages 1-11doi:10.1016/j.ijimpeng.2008.03.007.

A. Alum; B. Mobasher, M.ASCE; A. Rashid; and M. Abbaszadegan, “Image Analyses-Based Nondisruptive Method to Quantify Algal Growth on Concrete Surfaces”, JOURNAL OF ENVIRONMENTAL ENGINEERING © ASCE / MARCH 2009

C. Soranakom Æ B. Mobasher ,”Geometrical and mechanical aspects of fabric bonding and pullout in cement composites”, Materials and Structures DOI 10.1617/s11527-008-9422-6

Flávio de Andrade SilvaI, Romildo D. Toledo FilhoII, Barzin MobasherIII and Nikhilesh ChawlaIV, “A multi-scale investigation of the mechanical behavior of durable sisal fiber cement composites”, Revista Matéria, v. 15, n. 2, pp. 338-344, 2010

Alum, A., Rashid, A., Mobasher, B., and Abbaszadegan, M., “A Non-Disruptive Method to Quantify Algal Growth on Concrete Surfaces”, ASCE Journal of Environmental Engineering, Journal of Environmental Engineering, Vol. 135, No. 3, March 1, 2009. DOI: 10.1061/_ASCE_0733-9372_2009_135:3_185_

Z. Stahlecker, S. Sankaran, B. Mobasher and S. D. Rajan, and J.M. Pereira, “Development of Reliable Modeling Methodologies for Fan Blade-Out Containment Analysis. Part II: Finite Element Analysis” International Journal of Impact Engineering, Volume 36, Issue 3, March 2009, Pages 447-459.

S. Bansal; B. Mobasher; S. D. Rajan; and I. Vintilescu, “Development of Fabric Constitutive Behavior for Use in Modeling Engine Fan Blade-Out Events” Journal of Aerospace Engineering, ASCE, Journal of Aerospace Engineering, Vol. 22, No. 3, July, 2009. p. 249-259.

Soranakom, C., and Mobasher, B., “Flexural Design of Fiber Reinforced Concrete,” ACI Materials Journal, September-October 2009, pp. 461-469

Flavio de Andrade Silva, B. Mobasher, and R. D. T. Filho, “Cracking Mechanisms in Durable Sisal Fiber Reinforced Cement Composites,” Journal of Cement and Concrete Composites, 31 (2009) 721–730 10.1016/j.cemconcomp.2009.07.004

D. Zhu, M. Gencoglu, B. Mobasher, “Low Velocity Flexural Impact Behavior of AR Glass Fabric Reinforced Cement Composites,” Journal of Cement and Concrete Composites, 2009, 31 (2009) 379–387.

Peled, A., Mobasher, B., and Cohen, Z.,“Mechanical Properties of Hybrid Fabrics in Pultruded Cement Composites” Journal of Cement and Concrete Composites, 31 (2009) 647–657.

Flavio de Andrade Silva, D. Zhu, B. Mobasher, C. Soranakom, and R. D. T. Filho, ” High speed tensile behavior of sisal fiber cement composites”, Materials Science and Engineering A 527 (2010) 544–552

B. Laungrungrong, B. Mobasher, D. C. Montgomery, and C. M. Borror, “Hybrid Control Charts for Active Control and Monitoring of Concrete Strength,” ASCE Journal of Materials Engineering, Vol. 22, No. 1, Jan 1, 2010, pp. 77-87, 2010.

Flávio de Andrade Silva, Barzin Mobasher, Romildo Dias Toledo Filho,”Cracking mechanisms in durable sisal fiber reinforced cement composites”, Cement & Concrete Composites xxx (2009) xxx–xxx

S. Bansal1, B. Mobasher2, S. D. Rajan, I. Vintilescu, “Development of Fabric Constitutive Behavior for Use in Modeling Engine Fan Blade-Out Events”, 10.1061/ASCE0893-1321200922:3249

Bonakdar, A., Mobasher, B., Dey, S.K., Roy, D. M.” Multi-Scale Evaluation of Alkali Silica Reactions in Blended Cement Materials, ACI Materials Journal, 2010, ACI Materials Journal, V.107, No. 4, pp. 380-386.

Bonakdar, A., and Mobasher, B., “Multi-Parameter Study of External Sulfate Attack in Blended Cement Materials,”Construction and Building Materials, 24 Volume 24, Issue 1, January 2010, Pages 61-70. DOI: 10.1016/j.conbuildmat.2009.08.009

Travis, Q.B., and Mobasher, B., “Correlation of Elastic Modulus and Permeability in Concrete Subjected to Elevated Temperatures,” ASCE Journal of Materials in Civil Engineering, 22, 735 (2010).

Soranakom, C., and Mobasher, B., “Modeling of tension stiffening in reinforced cement composites: Part I -Theoretical Modeling, Materials and Structures, (2010) 43:1217–1230 DOI 10.1617/s11527-010-9594-8, 2010.

Soranakom, C., and Mobasher, B., “Modeling of tension stiffening in reinforced cement composites: Part II – simulations vs. experimental results,” Materials and Structures, (2010) 43:1231–1243, DOI 10.1617/s11527-010-9593-9, 2010.

D. Zhu, B. Mobasher, S.D. Rajan, “Dynamic Tensile Testing of Kevlar 49® Fabrics,” ASCE Journal of Materials in Civil Engineering, Vol. 23, No. 3, March 1, 2011. DOI: 10.1061/(ASCE)MT.1943-5533.0000156

Moradi-Marani, F., Shekarchi, M., Dousti, A., and Mobasher, B., “Investigation of corrosion damage and repair system in a concrete jetty structure” ASCE Journal of Performance of Constructed Facilities, 2010.

Flávio de Andrade Silva, D. Zhu, B. Mobasher, and Romildo Dias de Toledo Filho, “ Impact Behavior of Sisal Fiber Cement Composites under Flexural Load” ACI Materials Journal, V. 108, No. 2, March-April 2011, pp. 1-10.

M. Shekarchi, A. Bonakdar, M. Bakhshi, A. Mirdamadi, and B. Mobasher, “Transport Properties in Metakaolin Blended Concrete, “ Construction & Building Materials, 24 (2010) pp 2217–2223.

Silva, F., Mobasher, B., Toledo Filho, R.,“Fatigue Behavior of Sisal Fiber Reinforced Cement Composites” Materials Science and Engineering A. Materials Science and Engineering: A . Volume 527, Issues 21-22, 20 August 2010, Pages 5507-5513.

Aboozar Bonakdar, Barzin Mobasher, Sandwip K. Dey, and Della M. Roy ,”Correlation of Reaction Products and Expansion Potential in Alkali-Silica Reaction for Blended Cement Materials”, ACI Materials Journal/July-August 2010

S.D. Rajan and B. Mobasher, “A Comprehensive Methodology for Characterization of Dry Fabrics”, World Journal of Engineering, 7:1, 154-162, 2010.

Zhu, D., Peled, A., Mobasher, B., “Dynamic Tensile Testing of Fabric-Cement Composites, Construction and Building Materials, Volume 25, Issue 1, January 2011, Pages 385-395, doi:10.1016/j.conbuildmat.2010.06.014

D. Zhu, B. Mobasher and S. D. Rajan, “ Experimental Study and Modeling of Single Yarn Pull-out Behavior of Kevlar® 49 Fabric”, in press, Composites: A, JCOMA-10-365, 2011 , doi:10.1016/j.compositesa.2011.03.017

D. Zhu, B. Mobasher and S. D. Rajan, “Non-Contacting Strain Measurement for Cement-Based Composites Under Dynamic Tensile Loading” Cement and Concrete Composites,” CCC-D-10-00211, Submitted on May 17, 2010.

D. Zhu, B. Mobasher and S. D. Rajan, “Characterization of Dynamic Tensile Testing using Aluminum Alloy 6061-T6 at Intermediate Strain Rates,” ASCE Journal of Engineering Mechanics, JRNEMENG-S-09-00345, in press, DOI: 10.1061/(ASCE)MT.1943-5533.0000156.

D. Zhu, S. D. Rajan, B. Mobasher , Peled, A., and Mignolet, M. “Modal Analysis of a Servo-hydraulic High Speed Machine and Its Application to Dynamic Tensile Testing at an Intermediate Strain Rate,” Experimental Mechanics, DOI 10.1007/s11340-010-9443-2

Mechtcherine, V. Silva, F., Butler, M., Zhu, D., Mobasher, B., Gao, S. L. , Mäder, E., “Mechanical behaviour of strain-hardening cement-based composites (SHCC) under low and high tensile strain rates”, Journal of Advanced Concrete Technology, Vol. 9 No. 1, 51-62. (2011). doi:10.3151/jact.9.51

Silva, F., Butler, M., Mechtcherine, V., Mobasher, B., “ Strain Rate Effect on the Tensile Behaviour of Textile-Reinforced Concrete under Static and Dynamic Loading Materials Science & Engineering A, Materials Science and Engineering A 528 (2011) pp 1727–1734 (2010),doi:10.1016/j.msea.2010.11.014

Busaba Laungrungrong; Barzin Mobasher; Douglas Montgomery; and Connie M. Borror, “Hybrid Control Charts for Active Control and Monitoring of Concrete Strength”, 10.1061/ASCE0899-1561201022:177

M. Bakhshi, B. Mobasher, “Experimental observations of early-age drying of Portland cement paste under low-pressure conditions”, Cement & Concrete Composites 33 (2011) 474–484

Contents lists

Bakhshi, M. , Mobasher, B., “Experimental observations of vacuum drying of early-age portland cement paste”, Cement and Concrete Composites, 33, 2011, 474-484.

Zhu, D., Mobasher, B., Rajan, S.D., Dynamic Tensile Testing of Kevlar 49 Fabrics. ASCE Journal of Materials in Civil Engineering, 23(3), 230-239, 2011.

A. Bonakdar, B. Mobasher , N. Chawla, “Diffusivity and micro-hardness of blended cement materials exposed to external sulfate attack”, Cement & Concrete Composites 34 (2012) 76–85

Zhu, D., Mobasher, B., Rajan, S.D.,Peralta, P., “Characterization of Dynamic Tensile Testing using Aluminum Alloy 6061-T6 at Intermediate Strain Rates. ASCE Journal of Engineering Mechanics, 137(10), 669-679, 2011.

Zhu, D., Soranakom, C., Mobasher, B., Rajan, S.D., Experimental Study and Modeling of Single Yarn Pull-out Behavior of Kevlar 49 Fabric. Composites Part A, 42(7), 868-879, 2011.

Flávio de Andrade Silva, Mobasher, B., Soranakom, C. and Toledo Filho, R., “Effect of Fiber Shape and Morphology on the Interface Mechanical Characteristics in Sisal Fiber Cement Based Composites,” Journal of Cement and Concrete Composites Volume 33, Issue 8, September 2011, Pages 814-823

2012-2015

Deju Zhu, Barzin Mobasher, Aditya Vaidya, Subramaniam D. Rajan,”Mechanical behaviors of Kevlar 49 fabric subjected to uniaxial, biaxial tension and in-plane large shear deformation”.Composites Science and Technology 74 (2013) 121–130

Deju Zhu, Ph.D., Barzin Mobasher, Ph.D., P.E., M.ASCE, and Subramaniam D. Rajan, Ph.D., M.ASCE, “Dynamic Tensile Testing of Kevlar 49 Fabrics ” Part A

Deju Zhu, Aditya Vaidya, Barzin Mobasher, Subramaniam D. Rajan,” Finite element modeling of ballistic impact on multi-layer Kevlar 49 fabrics”, Composites: Part B 56 (2014) 254–262 Part B

V. Dey, A. Bonakdar, B. Mobasher, “Low-velocity flexural impact response of fiber-reinforced aerated concrete” ,Cement & Concrete Composites xxx (2013) xxx–xxx

Mehdi Bakhshi, Christopher Barsby, Barzin Mobasher,”Comparative evaluation of early age toughness parameters 3 in fiber reinforced concrete” Springer 2011.

V. Dey, A. Bonakdar, B. Mobasher, “Low-velocity flexural impact response of fiber-reinforced aerated concrete”, Cement & Concrete Composites xxx (2013) xxx–xxx

Barzin Mobasher, Mehdi Bakhshi, Christopher Barsby, “Back calculation of residual tensile strength of regular and high performance fiber reinforced concrete from flexural tests”, Construction and Building Materials 70 (2014) 243–253

Barzin Mobasher, Vikram Dey, Zvi Cohen, Alva Peled, “Correlation of constitutive response of hybrid textile reinforced concrete from tensile and flexural tests”, Cement & Concrete Composites 53 (2014) 148–161

Zhu, D., Mobasher, B., Rajan, S.D., Non-Contacting Strain Measurement for Cement-Based Composites in Dynamic Tensile Testing. Cement and Concrete Composites, 34(2), 147-155, 2012.

Zhu, D., Mobasher, B., Erni, J., Bansal, S., Rajan, S.D., Strain Rate and Gage Length Effects on Tensile Behavior of Kevlar 49 Single Yarn. Composites: Part A 43 (2012) 2021–2029, Composites Part A, 2012.

Bakhshi, M., Mobasher, B., M. Zenouzi. “Model for early age rate of evaporation of cement-based materials”, ASCE Journal of Engineering Mechanics. Nov 2012, V. 138, 11, pp. 1372-1380.

Zhu, D., Mobasher, B., Vaidya, A., Rajan, S.D., Mechanical Behavior of Kevlar 49 Fabric Subjected to Uniaxial, Biaxial Tension and In-plane Large Shear Deformation. Composites Science and Technology, Composites Science and Technology, 2013; 74:121-130

Zhu, D., Mobasher, B., Peled, A. “Experimental study of dynamic behavior of cement-based composites Journal of Sustainable Cement-Based Materials Volume 2, Issue 1, 2013 pages 1-12.

Bonakdar, A., Babbitt, F., Mobasher, B., Physical and Mechanical Characterization of Fiber-Reinforced Aerated Concrete (FRAC), Cement & Concrete Composites Volume 38, April 2013, Pages 82–91 (2013)

Bakhshi, M., Barsby, C., Mobasher, B., “Comparative Evaluation of Early Age Toughness Parameters in Fiber Reinforced Concrete”, Materials and Structures, DOI 10.1617/s11527-013-0098-1 May, 2013.

Zhu, D., Mobasher, B., Peled, A., “Experimental Study of Dynamic Behavior of Cement-Based Composites” Materials and Structures, Vol 47, 10.1617/s11527-013-0098-1

Zhu, D., Vaidya, A., Mobasher, B., Rajan, S.D., “Finite element modeling of ballistic impact on multi-layer Kevlar 49 fabrics”, Composites Part B: Engineering, Volume 56, January 2014, Pages 254–262

Barzin Mobasher, Yiming Yao, Chote Soranakom, “Analytical solutions for flexural design of hybrid steel fiber reinforced concrete beams, Engineering Structures 100 (2015) 164–177

Sumanta Das, MatthewAguayo, Gaurav Sant, Barzin Mobasher, Narayanan Neithalath, “Fracture process zone and tensile behavior of blended binders containing limestone powder”, Cement and Concrete Research 73 (2015) 51–62

Barzin Mobasher, Yiming Yao, Chote Soranakom, “Analytical solutions for flexural design of hybrid steel fiber reinforced concrete beams”, Engineering Structures 100 (2015) 164–177